Home>FPV Drone and Part>DIY Drone Kit>HappyModel Mobula7 1S Replacement 1S Series LIPOS Balance Charging Board for FPV Freestyle Tinywhoop Mobeetle6

HappyModel Mobula7 1S Replacement 1S Series LIPOS Balance Charging Board for FPV Freestyle Tinywhoop Mobeetle6 Item NO.: 33106570

Write a Review

US$ 6.44

Quantity: Stock ( 9999999 )

Estimate Shipping Cost

Product Name	HappyModel Mobula7 1S Replacement 1S Series LIPOS Balance Charging Board for FPV Freestyle Tinywhoop Mobeetle6
Item NO.	33106570
Weight	0.07 kg = 0.1543 lb = 2.4692 oz
Category	FPV Drone and Part > DIY Drone Kit
Brand	FEICHAO
Creation Time	2022-06-13

Specification:

Connection to the charger in XT60 + 4S balancing plug

Max amperage: 1.5A

Supports up to 4 1S lipos simultaneously

Weight: 35g

Dimensions: 81 * 46 * 20mm

Selection of the number of elements to be detected using the jumper (included)

Connector:

1x XT60H-F

1x JST-XH 4S1P

4x PH2.0

Note: Be careful to always load identical Lipos with an equivalent discharge.

If you charge 4 batteries at the same time, please insert the jumper cap into the position of number "4"; if you charge 3 batteries at the same time, please insert the jumper cap into the position of number "3", and so on.