Color: | |||||||||
---|---|---|---|---|---|---|---|---|---|
40A Standard | US$ 19.06 | ||||||||
40A Update | US$ 22.58 | ||||||||
50A Standard | US$ 20.48 | ||||||||
50A Update | US$ 23.99 | ||||||||
60A Standard | US$ 23.11 | ||||||||
60A Update | US$ 26.63 | ||||||||
80A Standard | US$ 25.76 | ||||||||
80A Update | US$ 29.28 | ||||||||
Quantity: 0 , Subtotal 0 |
Copy and share this link on social network or send it to your friends
CopyProduct Name | FEICHAO Water-cooled Two-way ESC 40A 50A 60A 80A With Water Pump For DIY RC Boat Wind-driven Ship 1:10 RC Car |
Item NO. | F38656/F38657/F38658/F38659/F38660/F38661/F38662/F38663 |
Weight | 0.16 kg = 0.3527 lb = 5.6438 oz |
Category | FPV Drone and Part > RC Parts > RC Car Parts |
Brand | FEICHAO |
Creation Time | 2020-10-14 |
Note: The upgraded version includes the remote switch water pump function.
Water-cooled heat sink interface diameter: 4.8MM
Water-cooled bidirectional 40A 2-6S UBEC 3A 5V
Water-cooled bidirectional 50A 2-6S UBEC 5A 5V
Water-cooled bidirectional 60A 2-6S UBEC 5A 5V
Water-cooled bidirectional 80A 2-6S UBEC 5A 5V
The update version:
it has the function of remote control of the water pump
The matching remote control switch has an electromagnetic shielding function, which can effectively shield the receiver from the sparks caused by the carbon brush of the pump. And the water pump battery can be shared with the ESC battery, but the receiver is not affected.
The standard version:
it is recommended that the water pump battery and ESC battery be powered separately.
Special attention: the working voltage of the pump is 6-12.6V. For voltage regulator module
Feature:
this item Belong to the player DIY products,and especially suitable for long time work of ESC.
This product adopts imported components and is fully tested for power.
It can be used in many fields, such as vehicles, boats, underwater propellers, wind-driven ships, etc.
Bidirectional 1: 1 power output, without brake, directly reverse, corresponding speed is fast, control linearity is good.
No need to calibrate the throttle stroke, plug and play.
This ESC includes UBEC output.
Note:
Recommend:
1. When using this product, the remote throttle stick must be in the middle position, otherwise the ESC will not start.
2. This product does not need to calibrate the throttle stroke. After the ESC starts, if the motor starts to rotate, you can use the remote control throttle fine adjustment to stop the motor.
3. This product is not welded at the factory, please contact customer service if necessary.
Copyright © 2006-2016 SHOP INC. All Rights Reserved.
No related record found